perma FLEX

Single part unit with dial type time setting

The automatic lubrication system perma FLEX is available in two convenient sizes (60 cm³ / 125cm³).

It can be used inside or outside applications at temperatures ranging from -20°C to +60°C. Discharge period setting is flexible and can be adjusted from 1 to 12 months using the dial on top of the lubricator.

perma FLEX comes fully assembled and ready-to-use. Simply turn the dial to desired discharge period and the system is activated. The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant.

  • Applications

    perma FLEX is a single point lubricator* suited to a broad range of rolling element and plane bearing applications and can also be filled with oil for the purpose of chain lubrication. The dial activation system is simple to use and allows a single product to be used where multiple products might otherwise be required. The dial system also allows the time setting to be adjusted during operation if necessary. If required the automatic lubricator can be turned off during extended periods of downtime. perma FLEX is IP68 rated meaning that it is dust tight and water proof.

    * Also commonly referred to as an autolube, permalube or automatic lubrication system

  • Product characteristics

    All-in-one system with dial for discharge period setting: 1, 2, 3 ... 12 months

    • Ready-to-use system / no assembly necessary
    • Quick and easy activation with dial
    • Discharge 1-12 months / in monthly steps = more flexibility  

    Reliable operation at -20 °C to +60 °C

    • For use in hot and cold environments
    • Year-round use for outdoor applications

    Ex-proof certification

    FM certification

    IP 68 protection

    • Safe lubrication in dangerous and critical areas
    • Reliable lubrication in moist and dusty areas
    • Increased workplace safety
  • Technical Data

    • Drive
      Gas generating unit
    • Housing
      Transparent plastic
    • Discharge period
      1, 2, 3, …, 12 months
    • Lubricant volume
      60 cm³, 125 cm³
    • Operating temperature
      -20 °C to +60 °C
    • Pressure build-up
      max. 5 bar
    • Protection class
      IP 68
    • Lubricants
      Grease up to NLGI 2 / oil
    • Max. tube lengths
      2.00 m
    • CE
    • Ex
    • IEC Ex
    • FM
    • TIIS
  • INSTALLATION KITS

    Installation kit (part no. K130G)

    Contents
    1 x 1 point bracket
    2 x 30mm SS beam clamp
    1 x Manual purge kit
    2 x Female swivel hose ends
    1 x 90 deg elbow
    1 x 1/4” BSPF – 1/8” BSPM reducer
    1 x 1/4" BSPF – 1/8” BSPM extension
    1.0 mtr of 3/8" ID grease line

     

    Installation kit (part no. K2CHG)

    Contents
    1 x 2 point cage bracket
    2 x Manual purge kit
    2.0 mtr of 3/8” ID grease line
    4 x Female swivel hose ends
    2 x 90 deg elbow
    2 x 1/4” BSPF – 1/8” BSPM reducer
    2 x 1/4" BSPF – 1/8” BSPM extension

     

    Installation kit (part no. K1CHS)

    Contents
    1 x 1 point cage bracket
    1 x Manual purge kit
    1.0 mtr of 3/8” ID grease line
    2 x Female swivel hose ends
    1 x 90 deg elbow
    1 x 1/4” BSPF – 1/8” BSPM reducer
    1 x 1/4" BSPF – 1/8” BSPM extension

     

    Installation kit (part no. K230G)

    Contents
    1 x 2 point bracket
    2 x 30mm SS beam clamp
    2 x Manual purge kit
    4 x Female swivel hose ends
    2 x 90 deg elbow
    2 x 1/4” BSPF – 1/8” BSPM reducer
    2 x 1/4" BSPF – 1/8” BSPM extension
    2.0 mtrs of 3/8" ID grease line

     

back to overview