perma FUTURA

For high corrosion, high humidity and high contamination environments

By tightening the activating screw the gas generator drops into the electrolyte fluid where it starts an electrochemical reaction that generates gas. The accumulation of gas forces the piston forward in a controlled manner, gradually expelling the lubricant under pressure. The lubricant is continuously injected into the lubrication point. The progression of the piston can be observed through the transparent body of the lubricator.

The lubrication period is determined by colour-coded activator screws (type 1, type 3, type 6 or type 12) and the average ambient temperature.

  • Applications

    perma FUTURA is a single point lubricator* which is suited to a range of rolling element and plane bearing applications. perma FUTURA is particularly well suited to low to medium speed bearings in wet operating environments. The transparent body of the perma FUTURA allows inspection of the piston position while the integrated support flange provides protection against damage in the event of accidental impacts.

    * Also commonly referred to as an autolube, permalube or automatic lubrication system

  • Product characteristics

    Simple activation with activator screw

    Activation:  1, 3, 6 or 12 months

    • Quick installation / tamper proof
    • Simple exchange / no special tools required
    • Inexpensive automatic single-point lubrication

    Transparent plastic housing with integrated support flange 

    • Easy fill level check via position of the lubricant delivery piston
    • Corrosion-proof

    Ex-proof certification

    Mining approval

    • Safe and reliable lubrication in explosive areas
    • Less exposure to safety hazards increases workplace safety
    • Suitable for underground use
  • Technical Data

    • Drive
      Electrochemical reaction
    • Housing
      Transparent plastic
    • Discharge period
      1, 3, 6, 12 months
    • Lubricant volume
      120 cm³
    • Operating temperature
      0 to +40 °C
    • Pressure build-up
      Max. 4 bar
    • Number of outlets
      1
    • Lubricants
      Grease up to NLGI 2 / oil
    • Max. tube lengths
      1.00 m
    • CE
    • Ex
  • INSTALLATION KITS

    Installation kit (part no. K1CHS)

    Contents
    1 x 1 point cage bracket
    1 x Manual purge kit
    1.0 mtr of 3/8” ID grease line
    2 x Female swivel hose ends
    1 x 90 deg elbow
    1 x 1/4” BSPF – 1/8” BSPM reducer
    1 x 1/4" BSPF – 1/8” BSPM extension

     

    Installation kit (part no. K230G)

    Contents
    1 x 2 point bracket
    2 x 30mm SS beam clamp
    2 x Manual purge kit
    4 x Female swivel hose ends
    2 x 90 deg elbow
    2 x 1/4” BSPF – 1/8” BSPM reducer
    2 x 1/4" BSPF – 1/8” BSPM extension
    2.0 mtrs of 3/8" ID grease line

     

    Installation kit (part no. K130G)

    Contents
    1 x 1 point bracket
    2 x 30mm SS beam clamp
    1 x Manual purge kit
    2 x Female swivel hose ends
    1 x 90 deg elbow
    1 x 1/4” BSPF – 1/8” BSPM reducer
    1 x 1/4" BSPF – 1/8” BSPM extension
    1.0 mtr of 3/8" ID grease line

     

    Installation kit (part no. K2CHG)

    Contents
    1 x 2 point cage bracket
    2 x Manual purge kit
    2.0 mtr of 3/8” ID grease line
    4 x Female swivel hose ends
    2 x 90 deg elbow
    2 x 1/4” BSPF – 1/8” BSPM reducer
    2 x 1/4" BSPF – 1/8” BSPM extension

     

back to overview